Lowers critical pH levels easily with no mixing or mess.
Use as part of the Simple Spa Care® Program.
- Lowers pH and total alkalinity
- Easier to use than granular balancers
- Pre-mixed - just pour into spa
1. Turn ON air blower or filter system.
2. Add 1 oz. directly into spa.
3. Retest water after 30 minutes.
4. Follow steps 1-3 until pH and total alkalinity are in the range of 7.2-7.8 and 80-120 ppm respectively.
Do NOT add more than 1 oz. at a time. Always wait 30 minutes between dosages and test water before each addition of Liquid Spa Down.
Lock in pH between refills with pH Balance or pH Balance Plus.
Bromine, chlorine and biguanide sanitizers.